Elevator Rail Brackets

Showing all 11 results

Elevator Rail Bracket Kit – Cross Weighted AHP 05-F

AHP 05-F Cross weight rail cantilever set is a rail cantilever system designed to place wide elevator cabins in projects with narrow elevator shafts.
Thanks to the AHP 05-F elevator rail console system, the elevator car rail can be mounted in front of the rail console and the weight rail can be mounted on the side. AHP 05-F elevator rail bracket set adapts to T50-T70-T89-T90 elevator rails. AHP 05-F elevator console set is made of galvanized sheet metal, bolted connection and does not require welding.

Features of Cross Weighted AHP 05-F Elevator Rail Cantilever Assembly

  • Compatible with T50-T70-T89-T90 elevator rails
  • Galvanized sheet coated
  • Ability to assemble with bolt set
  • No welding required

Elevator Rail Cantilever Set – Rear Weighted AHP 03-F

AHP 03-F Car rail console and weight rail console set designed for rear weight frame elevators.
AHP 03-F is a standard Octopus series 50 - 180 mm adjustable elevator rail console set as elevator car rail console. AHP 03-F elevator weight rail console is a 100 - 200 mm adjustable weight rail console set mounted on the rear wall. AHP 03-F elevator console set is made of galvanized sheet metal, bolted connection and does not require welding.

Features of Rear Weighted AHP 03-F Elevator Rail Cantilever Set

  • 100-200 mm adjustable weight rail console
  • 50-180 mm adjustable elevator car rail console
  • Galvanized sheet coated
  • Ability to assemble with bolt set
  • No welding required

Elevator Rail Cantilever Set – Rear Weighted AHP 04-F

AHP 04-F Car rail console and weight rail console set designed for rear weight frame elevators.
AHP 04-F elevator car rail console and weight rail console are mounted on the side fumes of the elevator shaft. AHP 04-F Elevator console, standard Octopus series 50 - 180 mm adjustable elevator rail console set. AHP 04-F elevator rail console adapts to T50-T70-T89-T90 elevator rails. AHP 04-F elevator console set is assembled as bolted, made of galvanized sheet, does not require welding.

Features of Rear Weighted AHP 04-F Elevator Rail Cantilever Set

  • 50-180 mm adjustable elevator car rail and lament console set
  • Galvanized sheet coated
  • Ability to assemble with bolt set
  • No welding required

Elevator Rail Cantilever Set – Side Weighted AHP 01-F

Side weighted elevator rail cantilever set AHP 01-F, adjustable between rails, installation is made with bolt set, no welding required.
AHP 01-F Single row elevator is designed in accordance with weight carcasses. The weight rail distance of the elevator can be adjusted between 700 - 1100 mm. Elevator main rail console There is an elevator rail console that provides console opening between 50 - 180 mm with 3 different connection options. AHP 01-F Side weighted elevator rail console can be assembled with bolt set, it is made of galvanized sheet and there is no need for welding.

Features of Side Weighted AHP 01-F Elevator Rail Cantilever Set

  • Adjustable between 700 - 1100 mm rail
  • 50 - 180 mm cantilever opening
  • Manufacturing from certified metal sheets
  • Galvanized coating

Elevator Rail Cantilever Set – Side Weighted AHP 02-F

Rail cantilever set AHP 02-F designed for side double row weight carcass elevator, adjustable between rails, installation is made with bolt set, no welding required.
AHP 02-F Double row elevator was designed in accordance with weight carcasses. The weight rail distance of the elevator can be adjusted between 1320 - 1650 mm. Elevator main rail console There is an elevator rail console that provides console opening between 50 - 180 mm with 3 different connection options. AHP 02-F Side weighted elevator rail console can be mounted with bolt set, it is made of galvanized sheet and there is no need for welding.

Features of Side Weighted AHP 02-F Elevator Rail Cantilever Set

  • Adjustable between 1320 - 1650 mm rail
  • 50 - 180 mm cantilever opening
  • Manufacturing from certified metal sheets
  • Galvanized coating

Elevator Rail Cantilever Set – Side Weighted AHP MEGA 1-F

AHP MEGA 1-F Side weight carcass elevator console set designed for large weight carcasses with double barite placed back to back for elevators with high capacity.
In AHP MEGA 1-F elevator console set, the wing length of the side weight compartment can be adjusted 290 - 600 mm, while the weight rail spacing varies between 700 - 1100 mm. The opposite main rail console of the elevator has the standardized 50 - 180 mm console opening of the Octopus series. No welding is required for the assembly of the AHP MEGA 1-F side-weighted elevator rail console. It can be assembled with bolt set and is made of galvanized sheet.

Features of Side Weighted AHP MEGA 1-F Elevator Rail Cantilever Assembly

  • 290 - 600 mm wing length
  • 700 - 1100 mm weight rail spacing
  • 50 - 180 mm cantilever opening
  • All nail bolt and dowel requirements
  • Bolted and weldless

Elevator Rail Cantilever Set – Side Weighted AHP MEGA 2-F

AHP MEGA 2-F Elevator console set designed for large weight carcasses with four rows of barite placed for elevators with side weight carcasses and high capacity.
The wing length of the side weight compartment of the AHP MEGA 2-F elevator console set can be adjusted between 290 - 600 mm, while the weight rail spacing varies between 1320 - 1650 mm. The opposite main rail console of the elevator has the standardized 50 - 180 mm console opening of the Octopus series. No welding is required for the assembly of the AHP MEGA 2-F side-weighted elevator rail console. It can be assembled with bolt set and is made of galvanized sheet.

Features of Side Weighted AHP MEGA 2-F Elevator Rail Cantilever Assembly

  • 290 - 600 mm wing length
  • 1320 - 1650 mm between weight rail
  • 50 - 180 mm cantilever opening
  • All nail bolt and dowel requirements
  • Bolted and weldless

Elevator Rail Cantilever Set – Side Weighted EKO 01-F

EKO 01-F Elevator console set developed for side weighted elevators.
EKO 01-F Elevator Rail Console Set with Side Weight Compartment It is an elevator console set designed for single row barite weight, the weight can be adjusted between 1060 mm fixed between the rails. As the main rail console of the opposite elevator, there is an adjustable elevator rail console with an opening between 70-110 mm, which is the 90-4 coded product. EKO 01-F Side weight partitions and elevator rail consoles are made of galvanized sheet, bolted connection and do not require welding.  

Features of Side Weighted EKO 01-FP Elevator Rail Cantilever Set

  • Adjustable between fixed 1060 mm rails
  • 70-110 mm cantilever opening
  • Manufacturing from certified metal sheets
  • Galvanized coating

Elevator Rail Cantilever Set – Side Weighted EKO 01-FP

Side weighted elevator rail cantilever set EKO 01-FP, adjustable between rails, no welding required, installation is made with bolt set.
EKO 01-FP Single row elevator is designed for weight carcasses. The weight rail distance of the elevator can be adjusted up to a fixed 1060 mm. Main rail console There is an elevator rail console that provides console opening between 50 - 180 mm with 3 different mounting options. EKO 01-FP Side weighted elevator rail console is made of galvanized sheet and assembled without welding and bolted.

Features of Side Weighted EKO 01-FP Elevator Rail Cantilever Set

  • Adjustable between fixed 1060 mm rails
  • 50 - 180 mm cantilever opening
  • Manufacturing from certified metal sheets
  • Galvanized coating

Elevator Rail Console Kit – Rear Weighted EKO 03-F

EKO 03-F Console set designed for elevators with rear weight carcasses, the weight console can be mounted on the rear wall. EKO 03-F is an elevator rail console set with standard 90-4 series 70-110 mm console adjustment as elevator car rail console. EKO 03-F shows a 100 - 200 mm cantilever opening as a weight rail console that can be mounted on the rear wall. Rear Weighted EKO 03-F elevator weight rail console is a console set that can be mounted on the wall.

Features of Rear Weighted EKO 03-F Elevator Rail Cantilever Set

  • 100 - 200 mm weight rail console
  • 70-110 mm opening cabin rail console
  • Bolted mounting
  • No welding required

Elevator Rail Console Kit – Rear Weighted EKO 04-F

EKO 04-F Designed for rear weight frame elevators, all consoles of the elevator can be mounted on the wall.
EKO 04-F elevator shaft console set is designed as a single type elevator rail console. It is an elevator rail console set that provides standardized 70-110 mm console adjustment of the 90-4 series for both elevator car rail console and elevator weight rail console. EKO 04-F elevator console set is compatible with T50-T70-T89-T90 elevator rails. EKO 04-F elevator console set is made of galvanized sheet metal, bolted connection and does not require welding.

Features of Rear Weighted EKO 04-F Elevator Rail Cantilever Set

  • 70-110 mm adjustable cab rail and weight console
  • Galvanized sheet coated
  • Ability to assemble with bolt set
  • No welding required